3D model
DRAFT MODEL, NOT CERTIFIED GEOMETRY
Parts select to focus, Esc to reset
DRAFT MODEL, NOT CERTIFIED GEOMETRY
Specifications
| Chain fall | 1 fall |
| Motor power | 2.2 kW (3.0 HP) |
| Current draw | 4.55 A (LIFTKET body nameplate, G01927) |
| Supply | 400V 3Ph+N 50-60Hz, 208V 3Ph+N 50-60Hz |
| Dimensions | 571 mm long, 264 mm wide (Kinesys O&M Fig 23) |
Source notes
Kinesys Elevation Hoist on a LIFTKET SB4.2/14M body, model ELE-01-1101-26 (Stage Design fleet: 24 units; plates and certificates). Chain 7x22 mm, single reeved, two brakes, four limit switches. Rating, speed, mass and envelope from Kinesys Elevation Hoist O&M 9200326 1v5 (p.44, Fig 23 p.45) and the Kinesys Elevation brochure 2013 p.8; motor and IP from the fleet LIFTKET nameplate. The O&M also prints an 11x31 chain on p.15/p.44; its own chain table, the plates and the certificates say 7x22. Power supply 3-phase + N + PE, 50-60 Hz, 208 V or 400 V set at the factory to match the Elevation Drive; brakes rated 100 % duty; operating 5-40 C (O&M p.44, spec sheet p.2). Kinesys 2024 range brochure p.11 confirms 500 kg at 24 m/min as the D8 model (500 kg D8+ runs at 12 m/min). Body reference: the LIFTKET Prospekt 2010 type table (printed p.10) lists the basic type 4.2 as model 4.2/00M: 1000 kg / 1 fall at 10 m/min, 2.2 kW, FEM 1Bm, 25 % ED / 150 starts/h, 7x22 chain, 37 kg; the SB stage variant itself is not tabled. The MOVEKET manual (p.16) lists VMK 250-33 as SB 4.2/14M. The Kinesys Elevation brochure 2017 p.12 lists the Liftket variable-speed hoist at 500 kg / 24 m/min D8 (and 1000 kg / 12 m/min D8), use with Elevation 1+ 2.2 kW, double brakes, overtravel and emergency limits; D8+ versions available.